Skip to content

Blog

Why One of Camera with Weak or No Signal?

by ChenJanice 11 May 2023 3 Comments
1. Check if the external antenna is loose or broken.
2. Is the camera too far from the NVR or too many obstacles? Place camera near to the NVR to observe the signal value.
3. If the signal placed on the side is relatively poor, you need to open the camera to see if the antenna clip on the camera module is loose or dropped.
Prev Post
Next Post

3 Comments

09 May 2023 Vasilii

Faced the same problem, the camera either appears on the network or disappears. Can I connect some of the cameras via wire and leave the rest via Wi-Fi?

09 May 2023 Vasilii

Faced the same problem, the camera either appears on the network or disappears. Can I connect some of the cameras via wire and leave the rest via Wi-Fi?

25 Jul 2022 Trevor Chang

I have an 8 camera wifi system. I have connected 4 cameras. I added a new camera to my system 10m from the NVR in a direct line of sight. The green light blinks and I cannot receive any signal on my monitor or my phone.

Leave a comment

Please note, comments need to be approved before they are published.

Someone recently bought a
[time] ago, from [location]

Thanks for subscribing!

This email has been registered!

Shop the look

Choose Options

Recently Viewed

Edit Option
Back In Stock Notification
this is just a warning
Login
Close

Language

Currency

Before you leave...

Take 20% off your first order

20% off

Enter the code below at checkout to get 20% off your first order

CODESALE20

Continue Shopping