Zum Inhalt springen

Festplatte nicht gefunden / Festplatteninformationen und formatieren Sie sie

durch ChenJanice 25 Apr 2023 11 Kommentare

Um das Problem „Festplatte nicht gefunden“ zu lösen, beachten Sie bitte die folgenden Hinweise.

1.Wenn eine Festplatte vorinstalliert ist, befinden sich 4 Schrauben an der Unterseite der NVR-Box.

2. Überprüfen Sie das Netzteil, um festzustellen, ob die Stromversorgung ausreicht oder nicht.

Hinweis: Der WiFi NVR (8208,8204,9604,9608,8508,8708) sollte eine Stromversorgung mit 12 V und 2,5 A verwenden.

PoE NVR (6708FN, 6708KR, 6708K) sollte ein 52V2,5A-Netzteil verwenden.

3. Öffnen Sie den NVR mit einem Schraubenzieher, überprüfen Sie die beiden Kabel, die die Festplatte verbinden, und prüfen Sie, ob sie locker sind.

4. Nehmen Sie die Festplatte heraus und installieren Sie sie in Ihrem Computer. Überprüfen Sie, ob der Computer die Festplatte erkennt.

Überprüfen Sie die Festplatteninformationen auf der NVR-Box und formatieren Sie sie

Klicken Sie mit der rechten Maustaste auf „System-Setup“ > „Allgemeine Einstellungen“ > „Festplatten-Setup“ > „Festplatte auswählen“ > „Formatieren“

Vorheriger Beitrag
Nächster Beitrag

11 Kommentare

24 Oct 2025 Andrey

Just bought new NVR model “TA-XM-2-608GP-AI-40C” and it does not detect new 1TB SSD disk.
Tried to format it to ext4 and FAT32, which didn’t help.
I can see in the other comments that this problem is pretty common. So, are you going to fix it?
For now will try to make a setup with my old good 120GB SSD, which works. However, this doesn’t look like a good long term solution.

20 Aug 2025 Boris

same problem was solved when I initialized HDD in GPT. When HDD in MBR it starts formating but then restarts the system repeatly

25 Jun 2024 Daniel

Good afternoon,

I purchased an NVR model W-NVR K8210-3WS. A week ago, the firmware was updated to version 3.2.4.9M, and since the installation and restarting the NVR, it does not recognize the Hard Disk Drive (HDD). I have tried installing a new HDD, and it does not recognize it either. I have checked the HDD and it has no errors in the MBR, FAT, or bad sectors. Is it possible to download previous firmware versions and see what happens?

Thank you.

23 May 2024 Robert Pellja
We have Techage model K8208W. Its 2Tb hard drive is no longer visible in the system. The NVR does not recognize the old HDD, so I bought a new 4Tb. The device recognized the new disk, but could not format it. The new disk is intended for video surveillance systems, so it must work in an NVR. How can I format the new disc in the device? Is there a software update needed?

Robert Helsinki – Finland

20 Nov 2023 Shakaki

Hi
we have network video recored bout by you
Model K8208-W
The system did not found the harddisk and they restart the system repeatly to find it until we remove the harddisk
the hard didisk working on the system without problem
The cameras working also without problem but we can’t rcording them because of the faiuler of harddisk

pls your help

rgrds
Vittco – Vienna – Austria

Hinterlasse einen Kommentar

Bitte beachte, dass Kommentare vor der Veröffentlichung genehmigt werden müssen.

Jemand hat kürzlich eine gekauft
[time] vor Minuten, von [location]

Danke fürs Abonnieren!

Diese E-Mail wurde registriert!

Kaufen Sie den Look ein

Wählen Sie Optionen

Bearbeitungsoption
Benachrichtigung wieder vorrätig
Vergleichen ()
Vergleichen
Produkt Artikelnummer Bewertung Beschreibung Sammlung Verfügbarkeit Produktart Andere Details
this is just a warning
Anmeldung
Nah dran

Sprache

Währung

Bevor Sie gehen...

Erhalten Sie 20 % Rabatt auf Ihre erste Bestellung

20% Rabatt

Geben Sie an der Kasse den untenstehenden Code ein, um 20 % Rabatt auf Ihre erste Bestellung zu erhalten

CODESALE20

Mit dem Einkaufen fortfahren