Festplatte nicht gefunden / Festplatteninformationen und formatieren Sie sie
Bitte beachten Sie die folgenden Hinweise, um das Problem „Festplatte nicht gefunden“ zu lösen.
1)Wenn die Festplatte vorinstalliert war, befinden sich 4 Schrauben an der Unterseite des NVR-Gehäuses.
2) Überprüfen Sie das an die NVR- Box angeschlossene Netzteil . Die NVR- Box verwendet eine 12-V-2A-Stromversorgung. Wenn Sie das 12-V-1A-Netzteil an den NVR anschließen, verfügt die NVR- Box nicht über genügend Strom, um die Festplatte anzutreiben.
3) Bitte öffnen Sie den NVR mit einem Schraubendreher, überprüfen Sie die beiden Verbindungskabel zur Festplatte und prüfen Sie, ob sie locker sind.
4)Nehmen Sie die Festplatte heraus und installieren Sie sie auf Ihrem Computer. Überprüfen Sie, ob der Computer die Festplatte erkennen kann.
Überprüfen Sie die Festplatteninformationen im NVR-Feld und formatieren Sie es
Rechtsklick > System-Setup > Allgemeines Setup > Festplatten-Setup > Festplatte auswählen > Klicken Sie auf „Formatieren“.
1 Kommentar
I have a purchased a NVR POE 4channels and i have conected to NVR I have installed an 1TB hard drive and the drive is not recognized, the drive is suitable for this task even is formatted in NTFS with no partitions but it can’t be read, instead I have installed an old drive with 80Gb the two drives manufactured by Seagate and this is recognized and promt to format the drive and is done and can save the videos but I can make it to the big drive I have mounted both in my pc and both are usable I can write/delete files.
Meanwhile I will try with the 80Gb drive an set the cameras to lower quality to avoid data overwritting, waiting for a fix for this from you, or maybe is a firmware update to do in the NVR.