How to upgrade the Wireless IP cameras in the Wireless Camera Kit ?

Please follow the below steps to upgrade the cameras.(For NVR Firmware version V.3.0 or newer) 

  1. Right Click  the mouse System Setup>System admin>Channel Setup>IPC Upgrade
  2. Download the IPC firmware by writing to seller:(support@techage.com)
  3. Copy the IPC upgrade file to the USB disk, and do not change the name of the upgrade file.
  4. Right Click  the mouse  System Setup>System admin>Channel Setup>IPC Upgrade>Tick the cameras> USB storage>click start.

4 comments

  • Hello, my current firmware on my 8 cameras is showing 3.4.0 on one cam, 2.6.20 on few of them 3.1.3 on the rest. Have you any newer firmware and could you send it me? Thanks.

    Hany A
  • Bonjours. j’ai des cameras Techage ( HD NVR Kite ) ( Model TA-8408W-4-508W-30 )( Power: DC12V) ( code bar 202008000517). Pour l’instant j’ai le FIRMWARE ( Version S/W 3.0.8.9) ce Firware est Obsolète qui beug, Je vous demande SVP si il y a un ROM récent. Cordialement

    AZAIZ
  • hi
    i have K820-3W NVR.
    I WANT TO KNOW WHAT IS THE LATEST VERSION OF THE NVR?
    AND WHAT IS THE DIFRENCE BETWEEN K8208-3W TO K8208-W?
    THANK YOU
    ELAD

    ELAD
  • Hello, my current firmware on ‘Techage 4CH 1080P POE CCTV System NVR Kit’ is from 2017. Have you any newer firmware and could you send it me? Thanks.

    Karol Puzser

Leave a comment

Please note, comments must be approved before they are published