Before you leave...
Take 20% off your first order
20% off
Enter the code below at checkout to get 20% off your first order
Enjoy Extra 5% Discount on Check Out Page.Free Shipping to US,CA,GB,JP and EU
Image Sensor |
1080P Color Sensor1/3CMOS |
Type of Day & Night Switch |
Electronic IR-CUT filter with auto switch |
Lens |
3.6mm |
Video Compression |
H.264 |
Bit Rate |
16Kbps~2Mbps |
Wireless Security |
WEP, WPA, WPA2 |
Wifi Frequency |
2.4GHz (IEEE802.11b/g/n) |
Smartphone OS |
Above iOS 7, Android 4.0 min |
Video Resolution |
1080P(1920*1080), VGA(640*480) |
Frame Rate |
25fps |
Angle of View |
120° |
Battery Type |
18650 |
Battery Capacity |
6000mAh |
Standby consumption |
500µA |
Working Consumption |
220mA |
Operating Temperature |
−20℃to 50℃, -4℉ to 122℉ |
SD Card Type |
Micro SD Card |
Maximal Compatible SD Card Storage |
128Gb |
Power on/off |
Hold the power button for 5 seconds |
Reset |
Hold the reset button for 5 seconds |
Slow Red Flash |
Waiting for connection |
Fast Red Flash |
Connecting |
Red Still |
Camera not connected to wifi |
Blue Still |
Camera is connected to wifi |
Please scan the following QR code to download the App.
Please make sure that the frequency of your wifi signal is 2.4GHz.In order to maintain a stable connection, the camera is not able to connect to 5GHz wifi.
5GHz signal is faster than 2.4GHz signal. However, since the frequence is doubled, the effective signal range is smaller and the penetrability is weaker. When we are using the camera, it is quite difficult to avoid walls between the camera and the router so 5GHz may cause unstable connection.
This situation happens rarely if we use it indoor as suggested. Usually the battery runs too fast outdoor because there are lots of things that will trigger false alarm such as vehicles and wild animals.
However, if the problem does happen, please turn the sensibility of the PIR motion detection sensor from “High to “Low”. This action will shorten the detection range from 32 feet to 13 feet, less movements will be detected, less photos or videos will be taken and less battery will be cost.
Please make sure that there is no obstacle near the lens.There are 3 IR LEDs around the lens to provide night vision brightness. If there is obstacle in front of the lens and too close to the camera, the obstacle will reflect the IR back to the camera and blur the images and the videos.
Please make sure that the accounts of both of you are in registered in the same country or area.
Please make sure that the charger that your are using is DC 5V 1A or 2A.Charge the camera with big current charger may cause damages to the battery and shorten the battery life.
Techage engage to provide reliable products and professional customer service for our clients. If you have problems, you are greatly welcomed to contact us!
E-mail: support@techage.com
ご登録ありがとうございます
このメールアドレスは登録されました!
製品 | SKU | 評価 | 説明 | コレクション | 可用性 | 製品の種類 | その他の情報 |
---|
言語
通貨
通貨
Take 20% off your first order
Enter the code below at checkout to get 20% off your first order