To set record, you need to install a hard drive to the NVR. When a hard drive is installed, the system will record in 24 hours mode automatically as default setting. You can set record in this way: go to system setup - record setup - record plan and set time for your recording:...

How to Add Device to App and View Remotely? Connect the NVR to router by network cable and then check if the status is Onlineon the right bottom of the NVR. The default user name is: admin and no password (Enter your password if you have set your own password.)  You can register an...

Make sure you have connected the NVR to your router with network cable and it shows online on the NVR. You can download the EseeCloud pc software, install and run it on your pc

1. Unplug all other cables from the nvr, including network cable, hdd, flash disk, just connect it to monitor. 2. Power off and then power on, reboot, repeat this for several times, you might get a chance to get into the system once. Then you can upgrade the system to the latest version. If...

Similar title: What to do when you can only view from LAN while not from WLAN?  Make sure you have connected the NVR to router by network cable and it shows Online on the NVR screen.  Right click and go to Fast Network and then click on Auto Config. After that, click on Test...