Blog

How to choose the right battery cameras for your needs?

Battery-powered security cameras offer a convenient and flexible solution for securing your home or business. You can place these cameras anywhere without worrying about complicated wiring or power connections.  Some most common types of battery powered security cameras are:  Solar-Powered Battery Cameras: Wire-Free Battery-Powered Cameras Cellular security Cameras  The availability of so many battery-operated security cameras today can make it difficult to...

On by TianCooper 0 Comments

How to reset a POE IP Camera?

Resetting a Power over Ethernet (PoE) IP camera can be necessary in certain situations, such as troubleshooting issues, restoring default settings, or preparing the camera for a new installation. The reset process may vary depending on the camera model and manufacturer. In this section, we will provide general steps to help you reset a PoE IP camera.  Make sure your camera online...

On by ChenJanice 0 Comments

Free App For Smart Security Cameras

  The widespread use of surveillance cameras in many households highlights their importance in ensuring security and peace of mind. With the ability to control these cameras through a smartphone...

On by ChenJanice 0 Comments

How to reset password for WiFi Camera?

  1. You can find the reset button near the SD Card Slot or RJ45 Lan cable. 2. Long press the reset button about 10 seconds. 3.Make sure you can hear the reset configuration sound, then all setting and password will restored. Default user name is admin, password is blank.  

On by ChenJanice 2 Comments

Requirements for surveillance hard drive

What hard drive is needed for these NVR/DVR system?  There are several requirements of hard disk drive (HDD) 1. The disk had better be the one used for survilliance, not for computer use. Here is reason. If you need buy a hard drive by yourself, please don't buy hard drive for desktop computer. The hard drive for desktop has the word "desktop" in its description. The...

On by HeKathy 1 comment

What to do when monitor does not display video?

1. Check whether all your cables are connected well. 2. Connect your NVR to internet. 3. Download CMS software and add your NVR to CMS 4. Right click the IP of NVR---choose Device Config---choose gui display---choose the lowest resolution---ok (reason: the resolution of your monitor is lower than NVR) if you even can not search the IP of NVR, then open the case of...

On by HeKathy 0 Comments