PRODUCT FAQ & KNOWLEDGE

How to find POE/IP camera's Version Information?


How to find POE/IP camera's Version Information?


1. If you use the camera alone, power on the camera with 12v power adapter and then connect it to router by network cable.


1.1 Download CMS to your pc (make sure the camera and pc in the same local network)and install it on your pc. Run it.


1.2 Refer to this link on how to add the camera to CMS: http://techage.com/knowledgecon.php?article_id=131


When you search the camera's ip, find the ip address like: 192.168.0.XX or similar to that.


1.3 After you add this camera to CMS, you can find its version information here: move your mouse on the camera and then right click - device config - version








2. If you are using it with poe/normal NVR, you can find its ip on the nvr: right click - quick set (you do not need to power on the camera with 12v power adapter and no need to connect it to router)
Follow the steps from 1.1.